Froming Machinery

300 Ton Bending Machine

It has a working table of 1.2 meters in length, with a displacement of 300 mm, has a variant of 90 to 2000 rpm, the length of displacement of the head is 120 mm, works that we can perform as wedges, external cuñeros, Manufacture of gears, drilling of standard flanges, wrenches, special nuts etc.

Profile and Plate Roller

We have two rollers one of them is the one of profiles that we can bend soleras, solid rounds, tubes, PTR, angles and beams all of 1 "up to 5" wide or of diameter in your case and for the plate Effective area of 3m long with capacity of plates up to 12mm or 1/2 in of special thickness for the manufacture of tanks.

Ironworker

We have a multifunctional has 4 workstations which has its different capacity as double in thin thicknesses up to 12 "in length, guillotine in thicknesses of 1" X 12 "in length, punzonado among others.

• Fold up to 12 in long
                  
• Punching or punching
                  
• Plate cutting, round bars, squares and beams etc.
                  
• 1 "board cut
                  
• Punching .500 "in
                  
• ¼ "plate double

Band and Guillotine Saw

In the band saw we can cut pipes, round, PTR, beams among others up to 400 mm in diameter or wide. The capacities of the guillotine are up to 12mm thick in A-36 steel plate with a 4m long table with tolerances of +/- .010 ".

Hydraulic press

• Working area 1100 X 965 mm
                  
• Piston stroke 700 mm
                  
• Piston stroke adjustable speed.
                  
• Operations we can perform:
                  
                    
• Straighten arrows and angles
                    
• Fold large radius plate
                    
• Placing bushes
                    
• Remove tightly fitting parts
                  

Plate Beveling Machine

• Cutting speed from 0 to 850 mm / min
                  
• Plate thicknesses for the bevel: 6 to 60 mm.
                  
• Maximum bevel width: 45 mm.
                  
• Minimum plate width: 55 mm
                  
• Material that can be machined: Aluminum, low carbon steels and stainless steel.